Menu

Specialty Lubricants

lokcease 20_20
LOKCEASE 20_20

High Temperature Anti-Seize Lubricant

More Information

  • Allows for easy disassembly without damaging gaskets
  • Withstands sustained temperatures up to 1204°C
  • Restores threads without special equipment
  • Will not harden, melt or evaporate
  • Resist water washout, salt spray, steam and weathering

HIGH TEMPERATURE - CONTAINS SPECIAL ADDITIVE TO WITHSTAND SUSTAINED HEAT OF UP 1204ºC, CUTS REPLACEMENT COSTS - REDUCES SEIZURE, CORROSION, PITTING, RUSTING AND CALLING OF METAL PARTS., ACTS AS A SEALANT - REDUCES FRICTION AND TIGHTENS ALL JOINTS. DOES NOT EVAPORATE, SEPARATE OR HARDEN AND FUSE TO METALS., RESIST WATER AND ACIDS - PROVIDES LONG TERM PROTECTION, FOR BOTH INDOORS AND OUTDOORS APPLICATION., MEETS OR EXCEEDS THE SCOPE AND INTENDED USE OF MIL SPEC A-907-E

lube-trac
LUBE-TRAC

More Information

Eliminates Dry Start Wear

Prevents Seals from Leaking

Prevents Rust and Corrosion

Displaces Water for Easy Drainage

Controls Foaming

Lowers Operating Temperatures and Resists Oxidation to Prolong Oil Life

Wide Temperature Range Up to 149°C 80W-90 flows down to –27˚C 85W-140 flows down to -12˚C

Viscosity Index Improvers: Maintain full viscosity over a wider temperature range to ensure full protection in fluctuating conditions. Eliminate the need to switch oil grade in different seasons.

resolve
RESOLVE

More Information

Meets or exceeds the Following Performance Requirements when added to Hydraulic Oil: (at 1:15 mix ratio) Dennison-Abex HF-1, HF-2, HF-O Vickers I-286-S and M-2950-S Ford M6C32 GM LH Specs: 04-1, 06-1, 15-1 JCB AW VG-32 Parsons AMCA AW Hydraulic DIN 51524 part 2 U.S. Steel 136.127

Provides superior protection against leaking seals, contaminants, pump wear, and erratic operation.

Improver of choice for almost every heavy equipment hydraulic application

sil free
Sil free

Release Agent and Light Lubricant

More Information

  • SIL FREE forms a slick, non-stick coating on metals, moulds and other surfaces. Its silicone- oil-free formula repels moisture.
  • SIL FREE’s water-based formula is low in odour, free of chlorinated solvents, nonflammable and safe to apply in human working environments.
  • SIL FREE has patented Nanosol micro-emulsion technology. Product will not separate upon standing, so there is no need to shake or agitate before spraying.
  • SIL FREE’s water-based formula does not contain dyes that are hazardous to the environment. Liberal applications will not stain or discolour equipment or machinery.

LOW-GLOSS, NON-STICK SURFACECOATING FOR METALS, MOULDS ANDPLASTICS, WATER-BASED FORMULA IS NON-STAININGAND COLOURLESS WHEN DRY, WORKS EFFECTIVELY WITHIN A RANGEOF TEMPERATURES FROM -40°UP TO260°FOR ALL APPLICATION NEEDS*, VERSATILE – GREAT AS AN ANTI-STICKOR ANTI-ADHESIVE COATING, LIGHTLUBRICANT AND AS ANTI-SPATTER LIQUIDFOR WELDING

tel-x plus
TEL-X PLUS

Multi-Purpose, Dry Lubricant and Release Agent with PTFE*

More Information

  • Eliminates sticking, squeaking and friction. Excellent on all metals, rubber, glass, wood, paper and plastics.
  • TEL-X PLUS is an excellent mould release agent. It leaves a smooth, quick-drying surface – the solvent evaporates within 30-seconds.
  • Dries instantly to a non-staining, non-corrosive, odourless and colourless thin film. Replaces silicones, ‘moly’, and oily products that stain and attract dust and dirt.
  • TEL-X PLUS repels water, oil dirt and dust.
  • TEL-X PLUS has a wide temperature range. It is usable at temperatures between -40°C and +260°C. (Melting point 321°C.)

PROVIDES A SMOOTH, QUICK-DRYING, SLICK SURFACE WHEREVER NEEDED, CLEAN, INERT AND RESISTANT TO MOST ACIDS AND SOLVENTS, STOPS STICKING, NON-STAINING, NON-CORROSIVE, NOOIL OR GREASE

yield aerosol
Yield aerosol

Penetrating Release Agent Loosens Rust Instantly Without Damage

More Information

  • Loosens rust and corrosion instantly. It also contains special inhibitors that prevent further rust and corrosion and prolong the life of parts.
  • Loosens frozen nuts, bolts and fittings without damage to metal or metal threads.
  • Penetrates and releases parts quickly allowing quicker work and less costly downtime. It penetrates and cleans even hard-to-reach, close-tolerance areas.
  • Cleans grease, dirt and sludge. Use for loosening stuck metal parts, lubricating air driven tools, storing dies, removing broken taps, dismantling equipment etc.

LOOSENS RUST INSTANTLY WITHOUT DAMAGE SO THAT PARTS CAN BERE-USED, FREES NUTS, BOLTS AND FITTINGS AND PENETRATES AND HELPS PREVENT FURTHER CORROSION., CONTAINS MOLY LUBRICANT FOR INCREASED PROTECTION