Menu

15 February 2017

Problems with diesel fuel

  • Lower diesel quality
  • Poor combustion
  • Contaminants

Lower diesel quality

To reduce emissions and comply with stricter environmental limits, diesel fuels have been modified:

Lower amount of sulfur (below 10 ppm):

EC directive mandates that diesel fuel contains no more than 10 ppm of sulfur.

Sulfur removal (natural lubricant) has caused two major problems, mechanical wear and chemical wear (process to remove sulfur removes corrosion inhibitors). It leads to poor fuel economy, excessive emissions and equipment breakdown. Contain a percentage of biodiesel (Fatty Acid Methyl Esters or FAME): To comply with EU requirements, diesel must now contain 5-7% FAME due to environmental benefits. This can lead to poor combustion and contaminants.

Poor combustion

Measured by the cetane number it indicates the ignition ability of the fuel. Low cetane negatively affects ignition ability of the fuel. It causes higher fuel consumption, power loss, increased emissions and detonation wear.

Contaminants

Wax & Sludge and Water

Wax & sludge results in hard start & fuel gelling, clogged injectors & filters, pump breakage and excessive emissions. Water contamination lead to rust & corrosion, water freezing, bacteria growth, acid formation and injector & filter clogging. It also causes poor combustion and pump damage.

Media Contacts

Find Out More

연락처

고객사를 위한 NCH 제품 및 솔루션에 관심 있으십니까?

NCH에 관심을 가져주셔서 감사합니다. NCH Career페이지를 확인하시고 NCH에서 여러분의 커리어를 발전시킬 수 있는 기회를 찾아보세요..

연락처